6.5 Configuring the air handling unit
6.5.1 Setting up X-CUBE controller com-
munication
Personnel:
HVAC technician
If any accessories have been installed be sure to
follow the installation and commissioning instructions
for those accessories before you start configuring the
unit.
You can assign the X-CUBE controller a static IP
address; as an alternative, the controller can receive a
dynamic IP address (DHCP) via the network.
Default IP address:
192.168.2.1
If you intend to connect the air handling unit to a per-
sonal computer, you need to set the static IP address on
the touch panel. If you intend to integrate the air han-
dling unit with a network, you need to obtain the IP
address dynamically (DHCP) from the network.
1.
Start the air handling unit.
2.
On the touch panel, select
‘Menu
è
Settings
è
Language’
.
Fig. 35: 'Language' window
3.
Select a language.
4.
On the touch panel, select
‘Menu
è
Communication’
.
Fig. 36: 'Communication' window
5.
Select 'Static IP/DHCP'.
Fig. 37: DHCP or static IP
6.
Set the static IP address or set dynamic assign-
ment of the IP address (DHCP), then confirm your
selection with .
ð
Communication for the X-CUBE controller has
been set up.
Initial commissioning
Configuring the air handling unit > Setting up X-CUBE controller communication
Air handling unit X-CUBE compact
40
Summary of Contents for X-CUBE compact
Page 49: ...Appendix Appendix Air handling unit X CUBE compact 49...
Page 50: ...A Adjusting the storage mass Adjusting the storage mass Air handling unit X CUBE compact 50...
Page 57: ...KLINGENBURG Assembly instructions Belt Drive for Rotary Heat Exchangers Round Belting...
Page 61: ...5 Assembling a round belt for the motor drive Note...
