Trox Technik X-CUBE compact, Transport And Installation Manual

Page: 41 / 144

6.5.2 Setting up network communication
Personnel:

HVAC technician
If you want to use a PC to communicate with the air
handling unit you have to set up the network connec-
tion. The following steps apply to a Windows PC.
1. On the desktop, select ‘Start è Control Panel
è Network and Internet
è Network and Sharing Center’ .
Fig. 38: Setting up a new connection or network
2. Select ‘Set up a new connection or network’
(Fig. 38/1).
ð
The ‘Set up a connection or network’ window
opens.
Fig. 39: Setting up a new network
3. Select ‘Set up a new network’ (Fig. 39/1), then
click ‘Next’ (Fig. 39/2).
ð
The software searches for an access point.
4. Select the air handling unit.
ð
The ‘Local Area Connection Status’ window
opens.
Fig. 40: LAN connection status
5. Select ‘Properties’ (Fig. 40/1).
ð
The ‘Local Area Connection Properties’
window opens.
Fig. 41: LAN connection properties
Initial commissioning
Configuring the air handling unit > Setting up network communication
Air handling unit X-CUBE compact 41