Activating accessories
8.
Use the supplied bus cable to connect the touch
panel to the corresponding cable entry point
(Fig. 2/4).
9.
Switch on the power supply for the accessory.
10.
Turn the mains isolator of the compact unit to
Ⅰ
/ON
11.
Use the touch panel to activate accessories. For
details on using the touch panel refer to the X-
CUBE compact operating manual.
12.
The unit recognises connected accessories auto-
matically. After approx. 5-30 s a message is dis-
played on the touch panel (example shown).
13.
Enter your password and confirm it with
✓
.
Default password: 0022
14.
To activate the accessory, press
✓
.
ð
Once an accessory has been activated, you
can configure it. For details refer to the X-
CUBE compact operating manual.
Establishing the bus communication
Accessories for X-CUBE compact units
10
Accessories for X-CUBE compact
Air handling unit X-CUBE compact
127
Summary of Contents for X-CUBE compact
Page 49: ...Appendix Appendix Air handling unit X CUBE compact 49...
Page 50: ...A Adjusting the storage mass Adjusting the storage mass Air handling unit X CUBE compact 50...
Page 57: ...KLINGENBURG Assembly instructions Belt Drive for Rotary Heat Exchangers Round Belting...
Page 61: ...5 Assembling a round belt for the motor drive Note...
