Trojan Technologies Aquafine TrojanUVLogic Series, Installation & Operation Manual

Page: 164 / 186

I nstallation Instructions
TROJAN UV Logic
TM
Operations & Maintenance
May 25, 2004
9-4
9.4 Automatic Mechanical Wiping
System (AMWS) installation
1. If an Automatic Mechanical Wiping System
(AMWS) is provided, connect the individual
conductors for the Gear Motor and Proximity
Sensor to the terminal blocks located inside
the CP. Refer to the wiring diagram included
with this manual to match wire tag numbers.
9.5 System Start-up
1. Allow the UVR chamber to fill slowly with
water.
2. Turn the lamps ON by pressing the switch
located on the face of the CP. A twenty-
second delay timer is initiated when the
lamps are turned ON. The system will not
register any alarms until this warm-up timer
CAUTION
Connect this system only to AC
power that conforms to the
information in the rating plate as
regards voltage and voltage
specification.
ITEM DESCRIPTION
1 LAMP HOLDER, AMALGAM 5m
2 CABLE, PROXIMITY SENSOR
3
HARNESS, WIRING WIPER
MOTOR
4 SWITCH, TEMPERATURE
Ground wire