Trojan Technologies Aquafine TrojanUVLogic Series, Installation & Operation Manual

Page: 16 / 186

PREFACE
Trojan UV Logic
TM
Operations & Maintenance
viii
CAUTION
T
HE
L
AMPS IN THIS SYSTEM EMIT ULTRAVIOLET LIGHT
. E
XPOSURE TO ULTRAVIOLET LIGHT CAN CAUSE
SERIOUS BURNS TO UNPROTECTED EYES AND SKIN
. N
EVER VIEW ULTRAVIOLET LIGHT DIRECTLY WITH
THE NAKED EYE
. A
LWAYS USE THE PROPER PROTECTIVE EYEWEAR OR A
UV­
RATED VIEW PORT
.
A
LWAYS WEAR PROTECTIVE CLOTHING WHEN EXPOSED TO ULTRAVIOLET LIGHT
. E
NSURE ALL
L
AMPS
ARE PROPERLY SECURED WITHIN THE
UVR
CHAMBER BEFORE TURNING THE SYSTEM ON
. T
URN THE
SYSTEM OFF BEFORE SERVICING
.
T
O PREVENT ELECTRICAL SHOCK
,
TURN THE SYSTEM OFF BEFORE REMOVING ANY OF THE COVERS ON
THE
UVR
CHAMBER OR OPENING THE
C
ONTROL
P
ANEL
.
T
O AVOID PERSONAL INJURY
,
TURN OFF POWER BEFORE REMOVING REACTOR END CAP
.
U
LTRAVIOLET
L
AMPS
,
AND THE
S
LEEVES THEY ARE HOUSED IN
,
ARE CONSTRUCTED OF
Q
UARTZ
TUBING
. Q
UARTZ TUBING IS VERY FRAGILE AND EASILY FRACTURED
. D
O NOT STRIKE
,
BEND OR APPLY
PRESSURE TO THIS MATERIAL OR IT WILL BREAK
. B
ROKEN
L
AMPS OR
S
LEEVES CAN CAUSE SERIOUS
CUTS
.
D
ISCARD
L
AMPS AND
S
LEEVES ACCORDING TO THE REQUIREMENTS OF YOUR JURISDICTION
.
A
CIDS USED FOR CLEANING THE
S
LEEVES MAY CAUSE BURNS
. W
EAR PROTECTIVE CLOTHING AND
PROTECTIVE EYEWEAR WHEN USING THESE MATERIALS
. A
FTER CLEANING
,
RINSE THE SYSTEM
COMPONENTS THOROUGHLY WITH DISTILLED WATER
. A
LWAYS FOLLOW THE SAFETY PRECAUTIONS
RECOMMENDED BY THE MANUFACTURER OF THE CLEANING SOLUTION
.
A
CIDS USED TO CLEAN THE SENSOR CAN CAUSE BURNS
. W
EAR PROTECTIVE CLOTHING AND EYEWEAR
WHEN HANDLING THESE MATERIALS
. A
FTER CLEANING
,
RINSE THE SYSTEM COMPONENTS
THOROUGHLY WITH DISTILLED WATER
. A
LWAYS FOLLOW THE SAFETY PRECAUTIONS RECOMMENDED BY
THE MANUFACTURER OF THE CLEANING SOLUTION
.
T
HIS SYSTEM USES ULTRAVIOLET LIGHT TO REDUCE THE CONCENTRATION OF PATHOGENS TO A NON
­
INFECTIOUS LEVEL
. N
ON
­
OBSERVANCE OF THE MAINTENANCE INSTRUCTIONS OR THE ALARM
MESSAGES WILL DIMINISH THE EFFECTIVENESS OF THIS SYSTEM
. R
EQUIRED DISINFECTION
EFFECTIVENESS IS NO LONGER GUARANTEED AND THAT THE REQUIREMENTS OF THE WATER SUPPLY
REGULATIONS ARE NO LONGER BEING MET
. A
HEALTH RISK EXISTS
.
T
HIS SYSTEM IS DESIGNED TO WORK OPTIMALLY UNDER THE REQUIREMENTS DESCRIBED BY THE
CUSTOMER
. A
NY MODIFICATION TO THESE FACTORS MAY REDUCE THE EFFECTIVENESS OF THE
DISINFECTION OF THE SYSTEM
. T
HE FACTORS THAT AFFECT OPERATION MAY BE FOUND IN THE
I
NTRODUCTION TO
UV T
HEORY
. S
EE
C
HAPTER
1.
R
EMOVE THE
E
ND
C
AP COMPLETELY
. D
O NOT ALLOW THE
E
ND
C
AP TO HANG ON THE
W
IPER
H
ANDLE
WHILE CONDUCTING WORK
.
T
HE
S
LEEVES MAY BE LEFT IN THE
W
IPER
A
SSEMBLY WHEN THE
S
TOP
P
LATE IS REMOVED
;
HOWEVER
,
IF THE
S
LEEVES ARE NOT REMOVED
,
YOU MUST ENSURE THEY ARE PROPERLY SUPPORTED WHEN THE
S
TOP
P
LATE IS NOT THERE TO AVOID DAMAGE
.
I
T IS ESSENTIAL THAT THE COMPONENTS OF THE
S
TOP
P
LATE
A
SSEMBLY BE PROPERLY INSTALLED ON
TO THE END OF THE
D
RIVE
S
CREW FOR CONSISTENT
W
IPER OPERATION
.
F
AILURE TO DO SO MAY RESULT IN IMPROPER
W
IPER OPERATION
.
L
ONG
L
AMP SYSTEMS
(AL
MODELS
)
HAVE TWO SEPARATE
W
IPER
A
SSEMBLIES MOUNTED ON TO THE
D
RIVE
S
CREW
. M
AINTAIN THE DISTANCE OF
28”
CENTER TO CENTER BETWEEN THE TWO
W
IPER