Trojan Technologies Aquafine TrojanUVLogic Series, Installation & Operation Manual

Page: 119 / 186

Control Panel (CP)
Trojan UV Logic Operations & Maintenance
2006-1-19
7-15
Operator Interface
The Operator Interface is a Florescent Display
that is programmed with custom screens. The
Operator may navigate though the different
screens using the 5-button Keypad, as shown
below.
The system is controlled by the main On/Off
Power Switch located on the side of the CP.
The Ballasts / Lamps are turned ON and OFF in
accordance with the position of the switch.
Operation
The Trojan UVLogic is designed to operate with
very little intervention. The system will monitor
UV Intensity and Dose when required to ensure
that proper disinfection is being met. The
system will also monitor the UVR Temperature,
Lamp and Ballast Status, and when provided -
Wiper Status. In the event of an alarm, the
Operator Interface will display an alarm on the
screen and will keep track of them in an Alarm
History. With AMWS, the controller will monitor
wiping sequences, the frequency of wiping, as
well as the status. The variables on cleaning
frequency can be adjusted to suit varying site
conditions.
The buttons at the bottom of the following
screens take the Operator to the respective
screens:
HIST – Alarm History Screen
ACTI – Active Alarm Screen
MAIN – Main Screen
LOGIN – Login Screen
NEXT – Next page within this screen series.
(This option will only appear if there are enough
screens to need multiple pages.)
PREV
– Previous page within this screen (This
option will only appear if there are enough
screens to need multiple pages.)
CHANGE – Take user to the configurable
version of the current screen.
SAVE – Saves configurations and returns user
to the view only version of the current screen.
Specifications
Display: 128 x 64 Dot Matrix VFD
Control: Keypad with Five Button
Integrated Decal
Disconnect Switch
outside of Panel