Intex Krystal Clear SF90220-1 Owner'S Manual Download

Page: 1 / 22

341A

(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019

English

Krystal Clear

Sand Filter Pump

Model SF90220-1

220 - 240 V~, 50 Hz, 190 W

Hmax 3.0 m, Hmin 0.19 m, IPX4

Max. Water Temperature 35 °C

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

Don’t forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and boats

available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves

the right to change specifications and appearance, which may

result in updates to the instruction manual without notice.

OWNER’S

MANUAL

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/

Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong

Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

• Distributed in the European Union by/Distribué

dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading

B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

341-*A*-R0-2005

For illustrative purposes only.

Summary of Contents for Krystal Clear SF90220-1























Search results

Summary of Contents for Krystal Clear SF90220-1

Reviews:

Related manuals for Krystal Clear SF90220-1

Brands by name

Popular brands

Intex Krystal Clear SF90220-1, Owner'S Manual

Search results

Summary of Contents for Krystal Clear SF90220-1

Reviews:

Related manuals for Krystal Clear SF90220-1

Brands by name

Popular brands