Trojan Technologies Aquafine TrojanUVLogic Series, Installation & Operation Manual

Page: 136 / 186

Control Panel (CP)
TrojanUVLogic Operations & Maintenance
2006-01-19
7-32
Additional Inputs and Outputs
The following are available for custom applications. This list is not intended to cover all options. It is a
representative list of options that sites
may wish to exercise. Custom applications, like the ones that
follow will allow a site to wire device information into our system by these analog inputs. The controller
will provide a
graphical display of the information only . Also, if a signal is brought in, it can then be
wired out of our system to another if required. If you have a specific request, please contact your
representative. Additional Inputs and Outputs cannot typically override standard provided Inputs and
Outputs.
***It is possible to have up to 5 Analog Inputs and 4 Analog Outputs in total.
High Panel
Temperature Input / Output
(See note above) Analog 4-20mA Customer I/O
7.7 Digital Output Wiring Diagrams (next few pages)