Trojan Technologies Aquafine TrojanUVLogic Series, Installation & Operation Manual

Page: 133 / 186

Control Panel (CP)
Trojan UV Logic Operations & Maintenance
2006-1-19
7-29
Major Alarms
On a Major alarm immediate action is required by the Operator to ensure that disinfection is not
compromised. Alarm relays will be deactivated.
Alarm Description
Low UV Intensity 1
Major When the UV Intensity has dropped below the factory set point.
Multiple Lamp Alarms Multiple lamps are not functioning. It is based on a factory set
number of 2 or more, that is dependant on the dose required.
Lamp Alarm XX Major Appears when a lamp has ceased to function, lost power, or lost
communication.
Ballast XX Alarm Major Appears when a ballast has ceased to function, lost power, or lost
communication.
SCADA Communication
Alarm Major Appears when the SCADA Communication connection has been
lost.
No Flow Signal Major When flow signal is not detected the system automatically jumps
to 100% power until the signal is restored.
Reactor Hi Temp Major
(Analog Temp) This High Temperature Alarm occurs as a warning. This option is
available only when an Analog High Temperature is configured
for this system. (Not Required - Analog Option)
Refer to section 8-1 for alarm indicators and troubleshooting .