Instruments
86
Note:
•
It is not possible to select OFF-
ROAD mode whilst the motorcycle
is in motion, if the ABS or TC
settings are set to OFF-ROAD or
OFF.
•
In this case, the motorcycle must
be brought to a stop before the
riding mode change can take place.
Once the ABS, MAP and TC settings
have changed, the multifunction display
will return to the home screen and the
selected riding mode will be shown.
OFF-ROAD
AUTO
OFF-ROAD
MPG
MI
PSI
PSI
C N S
1
2
36
42
F
R
47
12
2
1
1.
Selected riding mode
2.
Home screen
The riding mode change is now
complete and normal riding can be
resumed.
Note:
•
The riding mode will default to
ROAD when the ignition is switched
ON if the OFF-ROAD mode was
active the last time the ignition was
switched OFF, with ABS and/or TC
set to OFF-ROAD or OFF.
Note:
•
Otherwise, the last selected riding
mode will be remembered and
activated when the ignition is
switched ON.
•
If the mode icons are not visible
when the ignition switch is in the
ON position, make sure that the
engine stop switch is in the RUN
position.
Incomplete Riding Mode Changes
In the event of an incomplete riding
mode change, both the previous and
newly selected riding modes will be
highlighted with a dashed border. This
indicates that the ABS, MAP or TC
settings
specified
by
the
newly
requested riding mode have not been
correctly activated.
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
C N S
MAP
1
1.
Incomplete riding mode change
In this case the MIL, ABS or TC warning
light(s) may be illuminated depending on
the current state of each system.
