Instruments
49
Bike Set Up - Hill Hold Control (if
fitted)
Hill hold control assists in making hill
starts. The system (when activated) will
apply the rear brake to hold the
motorcycle in position. The system will
then automatically deactivate and
release the rear brake when it detects
that the motorcycle is attempting to
move off.
TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD
INDICATORS
EXIT
BIKE SET UP
ABS
HILL HOLD
DISABLED
ENABLED
TC
SERVICE
To enable/disable hill hold control:
• From the Bike Set Up menu, push
the joystick down to select HILL
HOLD and press the joystick centre
to confirm.
• Push the joystick down to select
either ENABLED or DISABLED.
• Press the joystick centre to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
For more information on hill hold
control, see page 157.
Bike Set Up - Direction Indicators
The direction indicators can be set to
Auto Basic, Auto Advanced or Manual
mode.
EXIT
BIKE SET UP
SERVICE
TC
ABS
INDICATORS
INDICATORS
MANUAL
AUTO BASIC
TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD
AUTO ADVANCED
Selecting a Direction Indicators
Mode
To
select
the
required
direction
indicators mode:
• From the Bike Set Up menu, push
the
joystick
down
to
select
INDICATORS and press the joystick
centre to confirm.
• Push the joystick down/up to scroll
between
AUTO
BASIC,
AUTO
ADVANCED and MANUAL.
–
Auto
Basic
-
The
self-
cancelling function is on. The
direction
indicators
will
activate for eight seconds and
an additional 65 metres.
–
Auto Advanced
- The self-
cancelling function is on. A
quick short press activates the
direction indicators for three
flashes.
A
longer
press
activates
the
direction
indicators for eight seconds
and an additional 65 metres.
