General Information
94
Hand Controls
Keyless Ignition (if fitted)
The keyless ignition system allows the
motorcycle to be started without the
use of a mechanical key.
There are three keys supplied with the
motorcycle. One smart key and two
standard keys.
Smart Key
Note:
•
An additional smart key can be
purchased from your Triumph
dealer. However, only three keys
can
be
programmed
to
the
motorcycle.
This
can
be
a
combination of smart keys and
standard keys.
Smart Key Operation
Press the button on the smart key to
turn the key on. The button light shows
green briefly to indicate that the smart
key is on.
A short press on the smart key button
shows the status of the smart key; red
is OFF and green is ON. A long press of
the button will change the status to OFF
or ON after briefly showing the original
status colour first.
The smart key must be within close
proximity (one metre/three feet) of the
system sensor, which is located on the
left hand side of the motorcycle. If the
smart key is out of range of the system
sensor then it will be unresponsive and
the keyless ignition can not be
activated.
If the smart key battery is flat, then use
the smart key in the standard key
operation method.
1
1.
System sensor location
For more information on starting the
engine with keyless ignition, see page
148
ǃ
.
Standard Key Operation
To turn the motorcycle on with the
standard key, hold the standard key on
the system sensor located on the left
hand side of the motorcycle. The
standard key must be held against the
system sensor while pressing the
Engine Start/Stop switch in either the
QUICK START or Power ON/OFF position
(see page 98).
