English
GREAT BRITAIN •
customer service
tel:
08545 300 9799
e-mail:
internet:
www.clasohlson.com/uk
V
er
. 20
130827
Combination Safety Helmet
Art.no 40-8306 Model SM906, H867, VM85M,
VC85M, CS6R, EP167
Please read the entire instruction manual before use and save it for
future reference. We reserve the right for any errors in text or images
and for making any necessary technical changes to this document.
If you should have any questions concerning technical problems please
contact our Customer Services.
1. Safety
•
This product provides moderate protection from blows and impacts.
•
The helmet and its attachments must not be modified in any way.
•
If the helmet or any of its attachments is damaged in such a way
that the protection afforded is compromised, the damaged item
must be replaced before use.
•
The helmet does not protect the wearer from splashes of molten
metal, hot solids or electrical hazards. Bear in mind that the visor
does not afford equally good protection as approved safety glasses.
•
Always make sure that you have the proper protection for your
working conditions. If in doubt, check the relevant EU standards.
•
Use only spare parts and accessories approved by the manufacturer.
•
The ear defenders must form a tight seal over your ears and
the sealing ring/cushion must be in good condition/undamaged.
•
This product conforms to PPE Directive 89/686/EEC.
•
Always put the ear defenders on before exposing yourself to any
noise and wear them at all times.
•
Check your ear defenders regularly: The cushions should be intact,
the cups free from cracks and the headband should be flexible.
The ear defenders will be less effective over time, resulting from
wear and tear, chemical damage, etc.
Warning
: If these directions are not followed, the noise reduction
capability can be impaired.
Warning:
Always wear additional safety glasses if there is any risk of
small particles passing through the mesh visor and injuring your eyes.
2. Product description
Size-adjustable safety headwear kit with ear defenders and two visors
(mesh and plastic) for protecting your face and hearing when working
with machinery.
3. Operation
1. Attach the desired visor to the helmet.
2. Open the headband by turning the adjuster anticlockwise.
Place the ear cups over your ears.
3. Adjust the headband by turning the adjuster clockwise until it is
comfortable. Adjust the height of the ear defenders.
4. The ear cups should be a snug fit against your head.
4. Care and maintenance
•
Never use abrasive cleaning agents.
•
Clean in warm soapy water.
•
Store the product in a clean and dry plastic bag or pouch.
5. Disposal
This product should be disposed of in accordance with local regula-
tions. If you are unsure how to proceed, contact your local authority.
6. Specifications
Weight
785 g
Size range
52–62
6.1 Ear defenders EP-167, attenuation data
Frequency
(Hz)
Mean
Attenuation (dB)
Standard
Deviation (dB)
Requirement
(dB)
63
12.4
5.2
0
125
14.4
4.9
5
250
17.9
4.5
8
500
27.3
4.2
10
1000
34.1
4.2
12
2000
34.8
4.5
12
4000
32.8
4.6
12
8000
32.3
6.4
12
HML values
H
M
L
SNR
29.3 dB
23.8 dB
15.5 dB
25.9 dB
6.2 Labelling on the mesh visor
•
LD
= Manufacturer
•
VM85M
= Model number
•
F
= Mechanical strength of the visor, low energy impact
(6 mm steel ball at 45 m/s).
•
Year/month of manufacture
Example of Year/month of manufacture stamps (e.g. October 2009):
6.3 Labelling on the plastic visor
•
1
= Optical class of lens, permanent wear.
•
B
= Mechanical strength of the visor, medium energy impact
(6 mm steel ball at 120 m/s).
6.4 Labelling on the visor holder
•
LD
= Manufacturer
•
EN 166
= European standard to which the holder conforms
together with the plastic visor.
•
3
= Protection against liquids using the plastic visor (drips, splashes).
•
B
= Mechanical strength of the holder and plastic visor, medium
energy impact (6 mm steel ball at 120 m/s).
•
EN 1731
= European standard to which the holder conforms
together with the mesh visor.
•
F
= Mechanical strength of the holder and mesh visor,
low energy impact (6 mm steel ball at 45 m/s).
•
Year/month of manufacture
6.5 Labelling on the helmet
•
EN 397:1995
= European standard to which the helmet conforms.
•
0530
= ID number of the Testing Institute (Notified Body).
•
Year/month of manufacture
6.6 Labelling on the helmet harness
Year/month of manufacture.
7. Declaration of conformity
Conforms to
Personal Protective Equipment Directive 89/686/EEC
and tested to
EN 166
,
EN 1731
,
EN 397-1
and
EN 352-3
standards.
Type testing performed by:
C.R.I.T.T. SPORT-LOISIRS
21 Rue Albert Einstein – Zone du Sanital
86100 CHATELLERAULT - FRANCE
Notified Body 0501
CERTOTTICA SCARL
Zona Industriale Villanova
32013 - Longarone (BL) - ITALY
Notified Body 0530
