![background image](http://html1.mh-extra.com/html/banner/q45/q45_quick-start-manual_3730961001.webp)
Printed in USA
Apr 2014
P/N 179843 Rev. A
Step 1: Wire the Gateway’s Power and I/O
Wire the power, discrete I/O, and analog I/O on the Gateway according to the wiring diagram shown. To create a network with up to 47
Nodes, use a PLC and Modbus to map the I/O.
Gateway Model
DX80G2M6-B2T
Q45 01
This Quick Start Guide describes how to configure a wireless network with one Wireless Q45 Temperature/Humidity Sensor Node or
Wireless Q45 Temperature Only Sensor Node and one DX80G2M6-B2T Gateway using the Gateway’s DIP switch-based mapping.
Quick Start Guide for a Wireless Q45 Temp/Humidity
Solution Using the -B2T Gateway
AO2
GND
DI1
DI2
GND
AO1
GND
PWR
10–30 V dc
−
+
Load
Load
7
14
6
8
9
10
11
12
13
1
2
3
4
5
485+
485
−
RS-485 +
RS-485
−