General Information
123
• Refit the upper clamps, and secure
with the two
10 mm threaded bolts
in the rear bolt positions. Do not
fully tighten the bolts at this stage.
• Rotate the handlebar so that the
alignment
marking
on
the
handlebar aligns with the front left
hand split line of the clamp riser.
• Tighten the 10
mm bolts to
35
Nm
.
• Refit the 8
mm bolts to the front
positions and tighten to
26
Nm
.
Stands
Side Stand
Warning
The motorcycle is fitted with an
interlock system to prevent it from
being ridden with the side stand in the
down position.
Never attempt to ride with the side
stand down or interfere with the
interlock mechanism as this will cause
a dangerous riding condition leading to
loss of motorcycle control and an
accident.
1
chde 2
1.
Side stand
The motorcycle is equipped with a side
stand on which the motorcycle can be
parked.
Before riding, always make sure that the
side stand is fully up after first sitting
on the motorcycle.
