General Information
125
To remove the seat:
• Insert the ignition key into the seat
lock and turn it anticlockwise while
pressing down on the rear of the
seat. This will release the seat from
its lock and allow it to be slid
rearwards.
• If equipped with heated seats,
disconnect
the
heated
seat’s
electrical connector for complete
removal from the motorcycle.
To refit the seat:
• Reconnect
the
heated
seat’s
electrical connector (if equipped),
engage the seat's two outer
brackets under the loops on the
subframe and the two inner
brackets to brackets on the rider's
seat.
• Gently push the seat forwards and
press down at the rear to engage
in the seat lock.
1
2
3
1
4
1.
Passenger seat outer brackets
2.
Subframe loops
3.
Passenger seat inner brackets
4.
Rider seat brackets
Warning
To prevent detachment of the seat
during riding, after fitting always grasp
the seat and pull firmly upwards.
If the seat is not correctly secured, it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider's Seat
Warning
The rider’s seat is only correctly
retained and supported once the
passenger seat is correctly fitted.
Never ride the motorcycle with the
passenger seat detached or removed,
as the front seat will not be secured
and may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1
1.
Rider’s seat
