Maintenance
210
Headlight Adjustment
Tiger 1200 XR Only
The headlights can be adjusted by
means of vertical and horizontal
adjustment screws located on the rear
of each headlight. In addition, the
headlight unit is equipped with an easily
accessible adjuster to allow the vertical
adjustment to be corrected when the
motorcycle is fully loaded.
3
2
1
1.
Horizontal adjustment screw
2.
Vertical adjustment screw
3.
Headlight adjuster lever for loaded
conditions
To adjust the headlight:
• Switch the headlight dipped beam
on.
• Turn the vertical adjustment screw
on the headlight clockwise to raise
the beam or anticlockwise to lower
the beam.
• Turn the horizontal adjustment
screw clockwise to move the beam
to the right or anticlockwise to
move the beam to the left.
• Switch the headlights off when the
beam settings are satisfactory.
Headlight Adjustment Lever for
Loaded Conditions
1
2
1.
Headlight adjuster lever (unloaded
position)
2.
Headlight
adjuster
lever
(loaded
position)
For normal (unloaded) conditions the
headlight adjuster lever should be set in
the horizontal position (1).
For loaded conditions rotate the
headlight adjuster downwards until it
stops (2). This will lower the headlight
beams by approximately 2°.
