General Information
122
Handlebar Adjustment
Warning
It is recommended to have handlebar
adjustments carried out by a trained
technician of an authorised Triumph
dealer.
Handlebar adjustments carried out by
a technician who is not of an
authorised Triumph dealer may affect
the handling, stability or other aspects
of the motorcycle’s operation which
may result in loss of motorcycle
control and an accident.
Warning
Before starting work, make sure that
the motorcycle is stabilised and
adequately supported. This will help
prevent injury to the operator or
damage to the motorcycle.
Note:
•
This
procedure
assumes
the
handlebars are in the standard
position, as delivered from the
factory. If the handlebars have
already been adjusted as described
below, the bolt positions will be
reversed.
The handlebars are adjustable for reach
by approximately 20 mm.
To adjust the handlebars:
• Loosen and remove the handlebar
rear (8
mm threaded) clamp bolts,
and then the front (10
mm
threaded) clamp and riser bolts.
2
1
chiv_3
1.
10
mm bolts
2.
8
mm bolts
• Lift the handlebars out of the
handlebar risers and support with
the aid of an assistant.
• Rotate both risers through 180°
and align the bolt holes.
• Reposition the handlebars to the
risers.
2
3
1
chiu_2
1.
Upper clamp, left hand
2.
Clamp split line, front
3.
Handlebar alignment mark
