Instruments
80
To enable or disable the ABS system:
• Press the SCROLL button to select
ABS, then press the SELECT button
to confirm.
• Press the SCROLL button to select
ENABLE or DISABLE.
ABS
ENABLE
ABS (ENABLE Shown)
• Press the SELECT button to confirm
the selection and return to the
BIKE SETUP menu.
• If DISABLE is selected, the ABS
warning light will be illuminated and
the message WARNING - ABS
SYSTEM DISABLED will be briefly
shown in the multifunction display
screen.
• The ABS and all riding mode ABS
settings will be disabled until the
ABS is re-enabled. All ABS settings
are automatically enabled when the
ignition is turned OFF and then ON
again.
Note:
•
If the ABS is disabled by the rider,
traction control and cruise control
(if equipped) will still function.
Traction Control (TC)
It is possible to temporarily disable the
Traction Control (TC) system. The TC
system cannot be permanently disabled,
it will be automatically enabled when the
ignition is turned OFF and then ON
again.
Warning
Selecting TC DISABLE will disable the
traction control system.
All traction control settings stored for
each riding mode will be overridden
regardless of whether they are set to
Rain, Road, Sport, Off-Road or Off.
Traction control and the riding mode
TC settings will not be enabled again
until ENABLE is selected from the TC
menu, or the ignition is turned OFF
then ON again.
If traction control is disabled, the
motorcycle will handle as normal but
without traction control. In this
situation accelerating too hard on wet/
slippery road surfaces may cause the
rear wheel to slip, and may result in
loss of motorcycle control and an
accident.
