Page
1
of
21
CP0465
R&G
Unit
1
, Shelley’s Lane, East Worldham, Alton, Hampshir
e, GU34 3AQ
Tel: +44 (0)
1
420 89007 Fax: +44 (0)
1
Email:
FITTING INSTRUCTIONS FOR CP0465 CRASH PROTECTORS
FOR YAMAHA YZF-R25/R3
’
19-
THIS
KIT
CONTAINS
THE
ITEMS
PICTURED
AND
LABELLED
BELOW.
DO
NOT
PROCEED
UNTIL
YOU
ARE
SURE
ALL
PARTS
ARE
PRESENT.
P
LEASE BE AWARE THAT MODIFICATION TO BOTH THE LEFT AND RIGHT FAIRINGS IS REQUIRED
TO FIT THIS CRASH PROTECTOR KIT
.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
MOUNTING TO THE BIKE
P
LEASE NOTE THAT IN CASES WHERE KITS ARE PACKED WITH RUBBER WASHERS HOLDING THE COMPONENTS
ONTO THE BOLT
–
THE RUBBER WASHERS SHOULD BE THROWN AWAY
!
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
(
FOR CLARITY OF INSTRUCTIONS ONLY
)
D
IGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE TO DOWNLOAD FROM
GENERAL TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT = 12Nm
M6 BOLT = 15Nm
M8 BOLT = 20Nm
M10 BOLT = 40Nm
TOOLS REQUIRED
•
Metric Allen key/socket set to include 4,
5 and 8mm A/F sizes
•
Ratchet and socket set to include 10 and
17mm sizes
•
Phillips head and small flathead
screwdrivers
•
Torque wrench
•
Drill and 28mm hole saw
