General Information
70
An adhesive label will be fitted to the
wheel rim to indicate the position of the
tyre pressure sensor which is near the
valve.
The TPMS display screen on the
instruments will only be activated when
the system has been fitted.
1. TPMS warning light
2. Rear tyre pressure indicator
3. Front tyre pressure indicator
Tyre Pressures
Warning
The Tyre Pressure Monitoring System
(TPMS) is not to be used as a tyre
pressure gauge when adjusting the
tyre pressures.
For correct tyre pressures, always
check the tyre pressures when the
tyres are cold using an accurate tyre
pressure gauge.
Use of the TPMS system to set
inflation pressures may lead to
incorrect tyre pressures leading to
loss of motorcycle control and an
accident.
Caution
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor’s orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused by the use of
anti puncture fluid or incorrect
maintenance is not considered a
manufacturing defect and will not be
covered under warranty.
Always have your tyres fitted by your
authorised Triumph dealer and inform
them that tyre pressure sensors are
fitted to the wheels.
Caution
An adhesive label is fitted to the wheel
rim to indicate the position of the tyre
pressure sensor.
Care must be taken when replacing
the tyres to prevent any damage to
the tyre pressure sensors.
Always have your tyres fitted by your
authorised Triumph dealer and inform
them that tyre pressure sensors are
fitted to the wheels.
Summary of Contents for Speed Triple 1200 RS
