Triumph Speed Triple 1200 RS, Owner'S Handbook Manual, Page: 59 / 184

General Information
59
Steering Lock Button
Warning
For reasons of security and safety,
always make sure the steering lock
is on when leaving the motorcycle
unattended.
Any unauthorised use of the
motorcycle may cause injury to
the rider, other road users and
pedestrians and may also cause
damage to the motorcycle.
To lock the motorcycle, turn the
handlebar fully to the left and press the
steering lock button.
Power ON/OFF Position
The Power ON/OFF position switches
the electrical circuits and the
instrument display between on or off.
This allows access to the instrument
display without starting the engine.
Caution
Do not leave the switch in the Power
ON position for a long period of time
as this may cause damage to electrical
components and will discharge the
battery.
STOP Position
The STOP position stops the engine.
Note
Although the engine stop position
stops the engine, it does not turn off
all the electrical circuits and may cause
difficulty in restarting the engine due to
a discharged battery.
RUN Position
The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.
QUICK START Position
The QUICK START position operates the
electric starter allowing for a quicker
engine start.
From the ignition off, press and hold
the engine start/stop switch in the
QUICKSTART position with all the correct
conditions met, to start the motorcycle.
For more information, see the page 84.
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.