Triumph Speed Triple 1200 RS Owner'S Handbook Manual Download

Page: 94 / 184

How to Ride the Motorcycle

Warning

Do not park on a soft or steeply

inclined surface.
Parking under these conditions may

cause the motorcycle to fall over

causing damage to property and

personal injury.

To park the motorcycle:
• Select neutral and turn the ignition

switch to the OFF position.

• Select first gear.
• Lock the steering to help prevent

theft.

• Always park on a firm, level surface

to prevent the motorcycle from

falling. This is particularly important

when parking off-road.

• When parking on a hill, always

park facing uphill to prevent the

motorcycle from rolling off the

stand. Engage first gear to prevent

the motorcycle from moving.

• On a lateral (sideways) incline,

always park such that the incline

naturally pushes the motorcycle

towards the side stand.

• Do not park on a lateral (sideways)

incline of greater than 6° and never

park facing downhill.

• Do not leave the switch in the P

position for long periods of time as

this will discharge the battery.

Summary of Contents for Speed Triple 1200 RS

























































































































































































Search results

Summary of Contents for Speed Triple 1200 RS

Reviews:

Related manuals for Speed Triple 1200 RS

Brands by name

Popular brands

Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Search results

Summary of Contents for Speed Triple 1200 RS

Reviews:

Related manuals for Speed Triple 1200 RS

Brands by name

Popular brands