Triumph Speed Triple 1200 RS Owner'S Handbook Manual Download

Page: 80 / 184

General Information

When using the side stand, always turn

the handlebars fully to the left and

leave the motorcycle in first gear.
Whenever the side stand is used, before

riding, always make sure that the side

stand is fully up after first sitting on the

motorcycle.
For instructions on safe parking, refer

to the How to Ride the Motorcycle

section.

Tool Kit and Owner’s

Handbook

Owner's Handbook

The Owner's Handbook is supplied with

the motorcycle.

Tool Kit

The tool kit includes a C-spanner

and two adjustment tools. The two

adjustment tools are located on the

underside of the coolant expansion

tank cover. For information on removing

the coolant expansion tank cover, see

page 115.

1. 4 mm Allen key
2. Torx T30 adjustment tool

The 4 mm Allen key is for emergency

access to remove the fuel tank cap.
The Torx T30 adjustment tool is to

remove the seats/seat cowl and adjust

the headlight.

Summary of Contents for Speed Triple 1200 RS

























































































































































































Search results

Summary of Contents for Speed Triple 1200 RS

Reviews:

Related manuals for Speed Triple 1200 RS

Brands by name

Popular brands

Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Search results

Summary of Contents for Speed Triple 1200 RS

Reviews:

Related manuals for Speed Triple 1200 RS

Brands by name

Popular brands