Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Page: 111 / 184

Maintenance
111
• Fit the oil filter cover with the wire
guide in the same orientation noted
for removal. Tighten the fixing to
3 Nm.
• Attach the side stand switch
connector to the oil filter cover.
• Route the harnesses and hoses
through the wire guide as noted for
removal.
B01551
5
4
2
1
7
6
3
1. Side stand switch connector
2. Fixing
3. Cover
4. Wire guide
5. Engine subharness
6. Fuel tank drain hose
7. Coolant expansion tank drain hose
• Position the sprocket cover to
the crankcase with the coolant
expansion tank hose, fuel tank
vent hoses and the oxygen sensor
harness positioned as noted for
removal.
• Note the lower left hand fixing also
secures the oil filter cover between
the sprocket cover and crankcase.
• Fit and tighten the fixings to 10 Nm.
B01301
1
2
1. Sprocket cover
2. Fixings
• Fit the TSA shift force sensor upper
ball socket to the gear change
knuckle ball joint and secure with
the wire clip.
B01552
1
2
1. Wire clip
2. TSA shift force sensor
• Start the engine and allow it to idle
for a minimum of 30 seconds.