manualshive.com logo in svg

Triumph Speed Triple 1200 RS, Owner'S Handbook Manual, Page: 147 / 184

Share
Download
Triumph Speed Triple 1200 RS Owner'S Handbook Manual Download Page 147

Maintenance

147

B01219

2

1

1. Fixings
2.  Front brace

•  Reconnect the battery, negative 

(black) lead. Tighten the fixing to 

4.5 Nm.

•  Apply a light coat of grease to the 

terminal to prevent corrosion.

B01220

1

2

1. Fixing
2.  Negative (black) battery lead

Fuel Tank

The fuel tank must be carefully raised 

to access the front fuse box. Complete 

the following procedures for raising and 

refitting the fuel tank safely.

Raising the Fuel Tank

 Warning

Make sure the motorcycle is stabilised 

and adequately supported.
A correctly supported motorcycle will 

help prevent it from falling.
An unstable motorcycle may fall, 

causing injury to the operator or 

damage to the motorcycle.

 Warning

Never drain fuel from the fuel tank 

using non-approved, non-professional 

standard fuel handling equipment.
A fire causing destruction of property 

and injury to persons may result from 

use of non-approved fuel handling 

equipment.
Always use approved, professional fuel 

handling equipment.

Summary of Contents for Speed Triple 1200 RS

























































































































































































Reviews:

No comments