Triumph Speed Triple 1200 RS Owner'S Handbook Manual Download Page 52

Page: 52 / 184

General Information

Traction Control Settings

Warning

If the traction control is disabled, the motorcycle will handle as normal but without

traction control.
In this situation accelerating too hard on wet/slippery road surfaces may cause the

rear wheel to slip which may result in loss of motorcycle control and an accident.

Traction Control Settings Descriptions

ROAD

Optimal traction control setting for road use.

RAIN

Optimal traction control setting for road use in slippery conditions. Allows

minimum rear wheel slip.

SPORT

Allows increased rear wheel slip when compared with the ROAD setting.

TRACK

Traction control is set up for track use. Allows increased rear wheel slip when

compared to the ROAD setting.

Summary of Contents for Speed Triple 1200 RS

























































































































































































Search results

Summary of Contents for Speed Triple 1200 RS

Reviews:

Triumph Speed Triple 1200 RS, Owner'S Handbook Manual, Page: 52 / 184

Search results

Summary of Contents for Speed Triple 1200 RS

Reviews: