Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Page: 160 / 184

Cleaning and Storage
160
Washing
To wash the motorcycle, do the
following:
• Make sure that the motorcycle
engine is cold.
• Prepare a mixture of clean, cold
water and mild automotive cleaner.
Do not use a highly alkaline soap as
commonly found at commercial car
washes because it leaves a residue.
• Wash the motorcycle with a sponge
or soft cloth. Do not use abrasive
scouring pads or steel wool. They
will damage the finish.
• Rinse the motorcycle thoroughly
with clean, cold water.
After Washing
Warning
Never wax or lubricate the brake discs.
Always clean the brake disc with a
proprietary brand of oil-free brake disc
cleaner.
Waxed or lubricated brake discs may
cause loss of braking power and an
accident.
After washing the motorcycle, do the
following:
• Remove the plastic bags and tape,
and clear the air intakes.
• Lubricate the pivots, bolts and nuts.
• Test the brakes before motorcycle
operation.
• Use a dry cloth or chamois leather
to absorb water residue. Do
not allow water to stand on the
motorcycle as this will lead to
corrosion.
• Start the engine and run it for
5 minutes. Make sure that there is
adequate ventilation for the exhaust
fumes.