Triumph Adler DC 2430, Instruction Handbook Manual

Page: 48 / 420

Preparation before Use
2-12
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter
a login user name and password, and press [Login]. Refer to
Adding a User on page 11-5
for the default login
user name and password.
Be sure to set the time difference before setting the date and time.
If you change Date/Time setting, trial functions will be unavailable. For details, refer to
Optional Functions on
page 8-75
.
1
Press the
System Menu
key.
2
Press [ ], [Date/Timer] and then [Change] of
Time Zone
.
3
Select the region.
NOTE:
Press [ ] or [ ] to view the next region.
4
Press [Off] or [On] of
Summer Time
and press [OK].
NOTE:
If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
5
Press [Change] of
Date/Time
.
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
Time Zone
-12:00 International Date Line West
1/13
-11:00 Midway Island, Samoa
-10:00 Hawaii
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
-07:00 Arizona
Summer Time
Off
On
Status 08/08/2009 10:10
Cancel OK