manualshive.com logo in svg

Triumph Adler DC 2430, Instruction Handbook Manual

Share
Download
Triumph Adler DC 2430 Instruction Handbook Manual Download Page 327

Troubleshooting

10-7

10

Cannot duplex print 
on this paper.

Did you select a paper size/

media type that cannot be 

duplex printed?

Select the available paper type. 

Press [Continue] to print without 

using Duplex.

3-11

Cannot execute this 
job.

–

This job is canceled because it is 

restricted by Job Accounting. Press 

[End].

—

Cannot offset this 
paper.

Did you select a paper size/

media type that cannot be 

offset?

Select the available paper size/type.

Press [Continue] to print without 

using Offset.

3-13

Cannot print the 
specified number of 
copies.

–

Only one copy is available due to 

processing too many jobs in parallel.

Press [Continue] to continue printing. 

Press [Cancel] to cancel the job.

—

Cannot staple at the 
specified position.

Have you selected a 

position that cannot be 

stapled?

Select a position that can be stapled. 

Press [Continue] to print without 

using Staple.

—

Cannot staple this 
paper.

Did you select a paper size/

type that cannot be stapled?

Select the available paper size/type.

Press [Continue] to print without 

using Staple.

—

Check the cover.

Is there any cover which is 

open?

Close the cover indicated on the 

touch panel.

—

Check the document 
processor.

Is the document processor 

open?

Close the document processor.

—

Is the top cover of the 

document processor open?

Close the top cover of the document 

processor.

10-25

Check the finisher.

Is the document finisher set 

correctly?

Set the document finisher correctly. 

For details, refer to 

the respective 

Operation Guides

.

—

Check the toner 
container.

Is the toner container 

clogged with the toner?

Shake the toner container well and 

reinstall it.

—

Clean the slit glass.

–

Clean the slit glass using the cleaning 

cloth supplied with the document 

processor.

9-3

Confidential 
document is 
detected.

–

The machine detects the documents 

guard pattern. The scanned 

document is printed in blank and 

sending of the document is canceled.

8-73

Failed to specify Job 
Accounting.

–

The job is canceled. Press [End].

—

Failed to store job 
retention data.

–

The job is canceled. Press [End].

—

Error Message

Checkpoints

Corrective Actions

Reference 

Page

Summary of Contents for DC 2430





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands