Triumph Adler DC 2430, Instruction Handbook Manual

Page: 299 / 420

Default Setting (System Menu)
8-69
8
Secure Protocol
Encrypt the communication between your PC and the machine using the SSL encryption. After changing the
setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting
the system, refer to
Restarting the System on page 8-63
.
The following Secure Protocol settings are available.
• SSL Setup …8-69
• IPP Security Setup …8-69
• HTTP Security Setup …8-69
• LDAP Security Setup …8-70
SSL Setup
Select whether or not to use SSL. The default setting is
On
. Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [Next] of
Secure Protocol
, and then [Next] of
SSL
.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to
Restarting the System on page 8-63
.
IPP Security Setup
Select the IPP security level. This setup is available when
SSL
is
On
. The default setting is
IPP over SSL Only
.
NOTE:
IPP must be set to [On] in
Protocol Detail on page 8-66
.
Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [Next] of
Secure Protocol
, and then [Change] of
IPP Security
.
3
Press [IPP over SSL Only] or [IPP or IPP over SSL].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to
Restarting the System on page 8-63
.
HTTP Security Setup
Select the HTTP security level. This setup is available when
SSL
is
On
. The default setting is
HTTPS Only
.