Triumph Adler DC 2430, Instruction Handbook Manual

Page: 168 / 420

Sending Functions
5-10
1-sided/2-sided Selection
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1
Press the
Send
key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then [2-
sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
When selecting [2-sided], select the binding
direction and press [Original Orientation] to select
the direction in which the original is set on the
platen.
When selecting [Book], select the binding direction.
6
Press [OK].
7
Specify the destination, and press the
Start
key to
start sending.
Original Type Binding
1-sided Sheet Original 1-sided —
2-sided Sheet Original 2-sided*
* Only when the optional document processor is used.
Binding Left/Right,
Binding Top
Open Book Original such
as magazine and book
Book Binding Left,
Binding Right
Right Left
Top Edge Top
Original
Orientation
2-sided/Book Original
Book
2-sided
1-sided
Status 08/08/2009 10:10
Cancel OK Add Shortcut
Preview
Original
Zoom
Send 100%
---
:
:
:
---
Ready to send.
Destination
Place original.
Place original.