Triumph Adler DC 2430, Instruction Handbook Manual

Page: 239 / 420

Default Setting (System Menu)
8-9
8
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE:
[Cassette 3] and [Cassette 4] are displayed when the optional paper feeder is installed.
Use the procedure below to select the default paper source.
1
Press the
System Menu
key.
2
Press [Common Settings], [Next] of
Original / Paper Settings
and then [Change] of
Default Paper Source
.
3
Select a paper cassette for the default setting.
4
Press [OK].
5
Move to the copy or document box screen and press the
Reset
key.
Automatic Detection of Originals (Available for metric models only)
Automatically detect originals of special or non-standard size.
The table below lists the special or non-standard original sizes.
Use the procedure below to set automatic detection of originals.
1
Press the
System Menu
key.
2
Press [Common Settings], [Next] of
Original / Paper Settings
and then [Change] of
Original Auto Detect
.
3
Select [A6] or [Hagaki] of
A6/Hagaki
.
Select [Off] to disable automatic detection or [On] to enable automatic detection of
Folio
and
11x15"
respectively.
4
Press [OK].
Media for Auto Selection
Select a default media type for auto paper selection when [Auto] is selected of
Paper Selection
. If
Plain
is
selected, the paper source with plain paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
Use the procedure below to select the paper size and media type used by Auto Selection.
1
Press the
System Menu
key.
2
Press [Common Settings], [Next] of
Original / Paper Settings
and then [Change] of
Media for Auto (B & W).
Item Description
A6/Hagaki As A6 and Hagaki are similar in size, select either one of them for
automatic detection.
Folio Select Folio for automatic detection.
11x15" Select the 11×15" size for automatic detection.