Triumph Adler DC 2430, Instruction Handbook Manual

Page: 271 / 420

Default Setting (System Menu)
8-41
8
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
• Copy Density Adjustment …8-41
• Send/Box Density Adjust …8-41
• Print Density …8-42
• Drum Refresh …8-42
• Auto Drum Refresh …8-42
• Correcting Fine Black Lines …8-43
• System Initialization …8-44
• Display Brightness …8-44
• Silent Mode …8-44
• Auto Color Correction...8-44
• Gray Adjustment...8-45
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
1
Press the
System Menu
key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of
Copy Density Adjustment
.
3
Press [Change] of
Auto
or of
Manual
.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
Send/Box Density Adjust
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels
both in auto and manual density modes.
Use the procedure below to adjust the density.
1
Press the
System Menu
key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of
Send/Box Density Adjust.
.
3
Press [Change] of
Auto
or of
Manual
.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].