56
D01-051en202111 Manual TriBox3
Use
Advanced
Use
Commis-
sioning
Introduction
General
Information
FA
Q
Technical Data
W
arranty
Customer
Service
Contact
Keyword
Index
Accessories
Malfunction &
Maintenance
Malfunction & Maintenance
//
TriBox3
6 Malfunction and Maintenance
6.1 Cleaning and Upkeep
6.1.1 Cleaning the Enclosure
•
Regularly check the Tribox3 for mechanical damage.
•
Regularly check all connections for leaks and corrosion.
•
Regularly check all cables for mechanical damage.
•
Clean the TriBox3 with a soft damp cloth from time to time. Use a mild cleaning solution if necessary.
6.1.2 Manual Sensor Cleaning
To prevent unwanted measurements from being taken automatically when manually cleaning the sensors and
thus possibly generating false alarms, the TriBox3 should be set to service mode beforehand.
6.2 Maintenance and Inspection
6.2.1 Service Mode
Choose the menu item “Options” from the navigation bar.
When the service mode is activated, the relay, valve and buzzer are deactivated. In addition, the automatic
measuring system is suspended.
In each sensor parameter
, the behaviour for each parameter in service mode can be set.
Service mode also deactivates cleaning and prevents measurement commands from being sent to the sensor.
The power voltages of the sensors are no longer changed by the global trigger, and measurement values, which
are output by the analog outputs and are requested via the Modbus, receive the default value.
Summary of Contents for TriBox3
Page 1: ...TriBox3 OPERATING INSTRUCTIONS...
Page 2: ......
