11
D01-051en202111 Manual TriBox3
Use
Advanced
Use
Malfunction & Maintenance
Introduction
General
Information
FA
Q
Technical Data
W
arranty
Customer
Service
Contact
Keyword
Index
Accessories
Commis- sioning
TriBox3
//
Commissioning
3.4.2 Sensor
The “Sensor” button opens a submenu that displays the four COM ports, with sensors if applica
-
ble. If there are no sensors connected or if they are not recognized by the TriBox3, the “Sensor”
submenu displays the following:
If a sensor is connected and is not shown on a COM port, a device search of all COM ports is initiated by press
-
ing on the “Scan for Sensors” button in the lower area of the “Sensor” submenu.
If a connected sensor is not displayed after scanning the COM ports, check the compatibility of the sensor and
COM port settings (see chapter 4.3 and 6.3.3).
3.4.3 Display
The
“Display” button opens a submenu that shows displays which are already configured and
allows reconfiguration. It also allows the creation and configuration of new displays.
Summary of Contents for TriBox3
Page 1: ...TriBox3 OPERATING INSTRUCTIONS...
Page 2: ......
