42
D01-051en202111 Manual TriBox3
Use
Malfunction &
Maintenance
Commis-
sioning
Introduction
General
Information
FA
Q
Technical Data
W
arranty
Customer
Service
Contact
Keyword
Index
Accessories
Advanced
Use
Advanced Use
//
TriBox3
5 Advanced Use
5.1 Data Export
The “Data” button opens a submenu where all settings for data exchange using a USB stick (e.g.
data, software, calibration files, etc.) can be configured and executed.
The subitem “Export” allows data and spectra to be copied from the TriBox3 to USB
sticks, and this data can then be evaluated using standard programs.
Certain export characteristics can be defined in the five checkboxes:
“Use start date”
All data beginning with the start datum is copied to the USB stick.
“Use end date”
All data up to the end date is copied to the USB stick.
“Include spectra in export”
If using spectral probes, this allows the spectra to also be copied to the USB stick.
This selection is justified because the data volume of a spectrum is significantly greater than the calculated
number values. Export may take a while for spectra of longer time periods. If spectra are being used for evalu
-
ation, it is always recommended to activate the following subitem “Log to USB”.
“Split files and limit file sizes”
The exported data will be written into several smaller files instead of one large file. For later evaluation, these
individual files are then easier to handle.
“Remember last date for next export”
The datum from the last exported measured value is saved internally and can then be used as the start datum
of the next export.
Summary of Contents for TriBox3
Page 1: ...TriBox3 OPERATING INSTRUCTIONS...
Page 2: ......
