Trinity Highway REACT 350 II, Product Description Assembly Manual

Page: 4 / 68

TrinityHighway.com 3 Revision E November 2020
Customer Service Contacts
Trinity Highway is committed to the highest level of customer service. Feedback regarding the
REACT 350
® II, its assembly procedures, supporting documentation, and performance is always
welcome. Please contact Trinity Highway for additional information:
Trinity Highway
Telephone
(888) 323-6374 (USA)
(214) 589-8140 (International)
Contact Link TrinityHighway.com/Contact
Important Introductory Notes
Proper assembly of REACT 350 ® II is critical to achieve performance that has been evaluated
and accepted by the FHWA per NCHRP Report 350. These instructions should be read in their
entirety and understood before assembling the REACT 350
® II. These instructions are to be used
only in conjunction with the assembly of the REACT 350 ® II and are for standard assemblies only
as specified by the applicable highway authority. If you need additional information, or have
questions about the REACT 350
®
II, please contact the highway authority that has planned and
specified this assembly and, if needed, contact Trinity Highway’s Customer Service Department.
This product must be assembled in the location specified by the appropriate highway authority. If
there are deviations, alterations, or departures from the assembly protocol specified in this
manual, the device may not perform as tested.
Important:
DO NOT
use any component part that has not been specifically
specified herein for the REACT 350 ® II during assembly or repair.
This product has been specified for use by the appropriate highway authority and has been
provided to that user who has unique knowledge of how this system is to be assembled. No
person should be permitted to assist in the assembly, maintenance, or repair of this system that
does not possess the unique knowledge described herein. These instructions are intended for
an individual qualified to both read and accurately interpret them as written. These instructions
are intended only for an individual experienced and skilled in the assembly of highway products
that are specified and selected by the highway authority.
A manufacturer’s drawing package will be supplied by Trinity Highway upon request. Each
system will be supplied with a specific drawing package unique to that system. Such drawings
take precedence over information in this manual and shall be studied thoroughly by a qualified
individual who is skilled in interpreting them before the start of any product assembly.