Trinity Highway REACT 350 II, Product Description Assembly Manual

Page: 5 / 68

TrinityHighway.com 4 Revision E November 2020
Safety Symbols
This section describes the safety symbols that appear in this REACT 350 ® II manual. Read the
manual for complete safety and assembly information.
Symbol Meaning
Safety Alert Symbol:
Indicates Danger, Warning, Caution, or Important.
Failure to read and follow the Danger, Warning, Caution, or Important indicators
could result in serious injury or death to the workers and/or bystanders.
Important:
Read safety instructions thoroughly and follow the assembly
directions and suggested safe practices before assembling, maintaining, or
repairing the REACT 350
® II. It is the responsibility of the installer to follow the
instructions contained in this manual. Failure to comply with these warnings could
result in increased risk of serious injury or death in the event of a vehicle impact
with a system.
Important:
Please keep up-to-date instructions for later use and reference by
anyone involved in the assembly of the product.
Safety Rules for Assembly
* Important Safety Instructions *
This manual must be kept in a location where it is readily available to persons who assemble,
maintain, or repair the REACT 350
® II. Additional copies of this manual are available from Trinity
Highway by calling (888) 323-6374 or visiting TrinityHighway.com/Product/REACT-350-II/ . Please
contact Trinity Highway if you have any questions concerning the information in this manual or
about the REACT 350
® II. This manual may also be downloaded directly from the website below.
It is the responsibility of the installer to use appropriate safety precautions when operating power
equipment, and when moving heavy equipment or REACT 350
® II components. Work gloves,
apron, eye / ear protection, safety-toe shoes, and back protection shall be used.
Warning:
It is the responsibility of the installer to use all safety measures
incorporating appropriate traffic control devices specified by the highway authority.
These measures must be used to protect all personnel while at the assembly,
maintenance, or repair site.
Warning:
It is the responsibility of the installer to ensure that your assembly
meets all appropriate Manual on Uniform Traffic Control Devices (“MUTCD”) and
local standards.
Warning:
It is the responsibility of the installer to ensure REACT 350 ® II
delineation meet all federal, state, specifying agency, and local specifications.