Trinity Highway REACT 350 II, Product Description Assembly Manual

Page: 23 / 68

TrinityHighway.com 22 Revision E November 2020
3) Lifting/Placing the System
Mark the centerline on the front and rear of the Base Track. Use the Lifting Eyes located on
the Middle Rail of the Rear Base Track (look down into the Cylinders) to lift the REACT 350
® II
into place (Figure 15).
Use fixed-length slings with a 6,000 lb. [2722 kg] minimum capacity. Fixed slings will prevent
the REACT 350
® II from tipping. Do not lift overhead. Measure from the centerline to ensure
that the REACT 350 ® II is centered and positioned at the proper angle. The steel Base Track
will rest flush against the roadside obstacle face for assemblies that do not require transitions.
Figure 15 - Lifting Eye Location(s)
Warning:
Ensure the hoist device is properly rated to lift the REACT 350 ® II
system.
For Self-Contained Backup assemblies requiring transition hardware to concrete wall or
safety shape barrier (PN 616120), the steel Base Track should be 5” [127 mm] forward of the
roadside obstacle face (Figure 16).
Figure 16 – Transition Hardware
Lifting Eyes
5" [127 mm]
Barrier
Transition Hardware - PN 616120
Required to Help Prevent
Snagging of Impacting Vehicle
Concrete Pad
Base Track