Trinity Highway REACT 350 II, Product Description Assembly Manual

Page: 32 / 68

TrinityHighway.com 31 Revision E November 2020
Attach Optional Debris Covers
To attach Optional Debris Covers, center a cover on Cylinder 1. Note the orientation of the
grommets. The two grommets closest together should be located in the front or rear of the
Cylinder (Figure 27). Additional style covers are available by contacting Trinity Highway for more
options (p. 3).
Direction of Impact
Figure 27
Next, attach Optional Debris Cover to Cylinder with four #10 flat head screws and fender washers
ensuring each screw is positioned in the middle of the Cylinder wall (Figure 28).
Figure 28
Continue to attach the remaining covers as described above.
Note:
The covers may overlap; however, the overlap direction is not critical to system
performance.
[770 mm]
[445 mm]