TriMedika TRI TEMP, Instructions For Use Manual

Page: 20 / 32

TRITEMP™
Non-contact thermometer
EN
20 21
XV. Guidelines
• TRITEMP™ complies with EU
Directive 93/42/EC concerning
medical products.
• TRITEMP™ is traceable to ASTM
E 1965-98 and European
standard EN60601-1-2 and is
subject to precautions with regard to
electromagnetic compatibility.
The sensor is the most fragile part
of the device and great care should
be taken when cleaning the device.
Use only the cleaning agents
recommended in this manual.
• To clean the sensor use a cotton
bud moistened with isopropyl or
ethyl alcohol and gently wipe the
lens of the device using a side to
side motion. Avoid touching the lens
except when cleaning is required.
• The device exterior can be cleaned
by wiping gently with a cloth
moistened in a mild soapy detergent.
• Ensure liquid does not enter the
device and NEVER submerge in
water or liquid.
• Do not use water to clean the lens.
Ensure the device is completely dry
before use.
The device is factory calibrated at
the time of manufacture and if used
according to the instructions in this
manual should not require periodic
adjustment.
TriMedika recommends an annual
calibration check or when the accuracy
of the measurement is in question.
The thermometer should be disposed
of in accordance with the EC Directive
– WEEE (Waste Electrical and Electronic
Equipment).
XVI. Cleaning the
thermometer
XVII. Calibration check of
the thermometer
XVIII. Disposal of the
thermometer