TriMedika TRI TEMP, Instructions For Use Manual

Page: 16 / 32

TRITEMP™
Non-contact thermometer
EN
16 17
SETTING THE AUDIO - (ON/OFF)
• To switch audio function off
o Press and hold the POWER button
until you hear an audible bleep
o Release POWER button and °C
will start flashing on the screen
o Press the POWER again to move
through to the Audio mode
option. The screen display will
flash ON.
o Press ADJUST button to revert
back to OFF
o Press the POWER button 3 times
to move through the MODE
options and switch off the device
• To switch Audio Function ON
o Press and hold the POWER button
until you hear an audible bleep
o Release POWER button and °C
will start flashing on the screen
o Press the POWER again to move
through to the Audio mode
option. The screen display will
flash OFF
o Press the READ button to switch
audio ON
o Press the POWER button 3
times to move through the
MODE options and switch off the
device
SETTING THE READ MODE
• Body/ surface temp
o BODY mode is the default
setting and is used for the body
measurement of a patient and the
measurement range is 32°C to
42.9°C (89.6°F-109.2°F).
o SURFACE TEMP mode is used
to measure the temperature of an
object or liquid and should NOT
be used for patients. Surface
temperature measurements are
between 0°C to 60°C (32°F to
140°F).
• To move from BODY mode to
SURFACE mode
o Press and hold the POWER button
until you hear an audible bleep
o Release POWER button and °C
will start flashing on the screen.
o Press the POWER button 2 more
times to move through to the
READ location mode option. The
screen display will flash BODY.
o Press the READ button to change
to SURFACE TEMP.
o Press the POWER button 2 times
to move through the MODE
options and switch off the device