manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 80

www.trilithic.com

Page II-15

180 DSP Operation Manual

Signal Level Meter

Operating Level

The 

Operator Level

 setting is used to 

control whether the 180 DSP is operating 

in its normal mode or in an advanced 

logging mode. The logging mode is used 

for advanced troubleshooting by Trilithic 

technical support. 
The default setting for 

Operator Level

 is 

Normal

, use the up/down arrow buttons 

to select from the following preset values:

•  Select 

Normal

 for the normal mode 

of operation.

•  Select 

Logging

 for troubleshooting with Trilithic technical support.

•  Select 

Calibrate

 to enter the calibration mode.

Multiple User Control

The 

Multiple Users

 setting is used to 

control whether multiple user profiles are 

displayed when the 180 DSP is powered 

on. 
The default setting for 

Multiple Users

 is 

Yes

, use the up/down arrow buttons to 

select from the following preset values:

•  Select 

Yes

 to allow multiple user 

profiles.

•  Select 

No

 to use only one user profile.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands