manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 203

www.trilithic.com

Page IV-7

180 DSP Operation Manual

Signal Level Meter

Select the 

Open

 button from the 

Limit Set

 

pop-up menu and the 

Limit Set 

window will 

be displayed as shown in the image to the 

right.
From the 

Limit Set 

window, select the 

name of the limit set to use for the level 

measurement.
After selecting the limit set, the 

Level

 screen 

will be displayed again.

Opening a Limit Set

Select the 

Limit Set

 softkey as shown in the 

image to the right to select the limit set to use 

for the level measurement.

The Limit Set window will be bypassed if there is only one 

limit set to choose from.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands