manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 109

www.trilithic.com

Page II-44

180 DSP Operation Manual

Signal Level Meter

Press the 

Enter

 button and use the 

Virtual Keyboard

 to directly enter 

the channel number as shown in the 

image to the right.

Editing a Channel

To edit a channel from the channel 

plan, use the up/down arrow buttons to 

highlight the channel to be edited and 

then Press the 

Enter

 button. The 

Edit 

Channel

 screen will be displayed as 

shown to the right. 

Basic Channel Settings

From within the 

Edit Channel

 screen, use the left/right arrow buttons on the keypad to 

navigate through the list of setup items.

Channel ID

The 

Channel ID

 setting is used to 

number the selected channel. 

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands