manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 202

www.trilithic.com

Page IV-6

180 DSP Operation Manual

Signal Level Meter

Opening a Channel Plan

Select the 

Channel Plan

 softkey as shown 

in the image to the right to select the channel 

plan to use for the level measurement.

Select the 

Open

 button from the 

Channel 

Plan

 pop-up menu and the 

Channel Plan 

window will be displayed as shown in the 

image to the right.
From the 

Channel Plan 

window, select the 

name of the channel plan to use for the level 

measurement.
After selecting the channel plan, the 

Level

 

screen will be displayed again.

The Channel Plan window will be bypassed if there is only one 

channel plan to choose from.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands