manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 161

www.trilithic.com

Page II-96

180 DSP Operation Manual

Signal Level Meter

Delete Files

Perform the following steps to delete files from the internal memory of the 180 DSP:

1.  Use the arrow buttons to highlight the 

file that you want to delete.

2.  Select the 

File

 softkey.

3.  From the 

File

 pop-up menu, select the 

Delete

 button as shown in the image 

to the right.

4.  The 

Continue

 window will be 

displayed as shown in the image to 

the right.

5.  Select the 

OK

 button to delete the 

file or select the 

Cancel

 button to exit 

without deleting the file.

To delete multiple files at the same time, see the Select 

Multiple Files section earlier in this chapter.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands