Trilithic 180 DSP Operation Manual Download Page 355

Page: 355 / 386

www.trilithic.com

Page IV-159

180 DSP Operation Manual

Signal Level Meter

Overview

Traffic Control Plus is an optional feature of the 180 DSP. If you do not have this option, call

Trilithic at (800) 344-2412 in order to purchase an option activation code and start using this

option today.
To view the installed functions on your instrument, see

Section II: Setup Menu, Chapter 2:

Instrument Information

Select the

Traffic Plus

icon as shown in the

image to the right to perform a Traffic Control

Plus measurement using the 180 DSP.

The Traffic Control Plus spectrum menu

provides a real time view of the return band.

This menu has 100% coverage, so even the

shortest cable modem burst can be seen.

It will also show ingress even under a busy

upstream.
In a typical HFC plant the RF spectrum is

divided into two main bands, the forward band and the return band.

Traffic Control Plus

(OPTIONAL)

Chapter 9

Forward Spectrum

Return Spectrum

Summary of Contents for 180 DSP



































































































































































































































































































































































































Search results

Summary of Contents for 180 DSP

Reviews:

Brands by name

Popular brands

Trilithic 180 DSP, Operation Manual

Search results

Summary of Contents for 180 DSP

Reviews:

Brands by name

Popular brands