manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 266

www.trilithic.com

Page IV-70

180 DSP Operation Manual

Signal Level Meter

Probe Loss

Highlight the 

Probe

 field and then 

use either of the following methods 

to change the loss value:

•  Use the up/down arrow 

buttons to change the probe 

loss level in 1 dB increments.

•  Press the 

Enter

 button and 

use the 

Virtual Keyboard

 to 

directly enter the loss value 

as shown in the image to the 

right.

When finished entering the test point 

loss information, press the 

Back

 button 

to return to the 

Channel Plan Scan

 

screen.
The total test point compensation value 

will be displayed, as shown in the 

image to the right.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands